Ideal for cutting steel tubes on high performance automatic sawing machines
The CX 3 saw blade has been developed for cutting tubes on high performance automatic sawing machines, at a higher maximum cutting speed than with HSS saw blades.
It is most effective on sawing machines with accurate control of chip load and variable feed rate.
- Cutting steel tubes with a tensile strength between 600 – 1500 N/mm2
- Cutting speed: 500 – 180 m/min (LCL= 15mm low tensile – LCL > 80mm high tensile
- Tooth load 1/2/3: relation: 1/2/0.8. Starting values 0.05/0.1/0.04 mm/tooth
- Machines: Rattunde, Sinico, Bewo, RSA, Plantool, Adige, OMP